Optimizing the Mooring Configurations for Enhancing Safety in Ship to Ship (STS) Operations
Muhammad Afiq Irzuan Mhd Arif · Corresponding Author
Faculty of Maritime Studies, Universiti Malaysia Terengganu
Mohd Hafizi Said
Faculty of Maritime Studies, Universiti Malaysia Terengganu
Correspondence: muhammadafiqirzuan@gmail.com
Abstract
Ship-to-Ship (STS) transfers represent complex and high-risk maritime operations that demand effective management to minimize accidents and environmental hazards. A critical factor in ensuring vessel stability during these operations is the mooring arrangement, yet current practices remain inconsistent and lack standardized guidelines, resulting in operational inefficiencies and safety concerns. While existing studies often emphasize hydrodynamic forces or operational procedures, few have comprehensively assessed the risks and performance of mooring systems across both static and dynamic STS environments. This paper systematically reviews mooring arrangement models with the objective of enhancing safety and efficiency in STS oil transfer operations. Practical data, numerical simulations, and case studies are employed to compare conventional and innovative mooring systems under varying environmental and operational conditions. The study aims to identify key risk factors, quantify forces acting on mooring lines, and propose new guidelines for optimal mooring system application. A phased, mixed-methods research design was adopted, integrating computational modelling using Optimoor, statistical analysis of incident reports, and expert surveys from professionals in the STS domain. Anticipated findings indicate that hybrid mooring systems with symmetric layouts and integrated tension monitoring can significantly reduce slippage, lower peak loads, and adapt more effectively to complex wave–current interactions compared to fixed or elastic systems. The outcomes of this research contribute to a comprehensive framework for improving STS operational safety by combining theoretical insights with practical applications. Ultimately, the study seeks to advance best practices, establish standardized guidelines, and support sustainable maritime energy logistics.
Acknowledgement
The author gratefully acknowledges Universiti Malaysia Terengganu for providing the academic environment and resources that supported this study.
Conflict of interest
The author(s) declare that there is no conflict of interest regarding the research, authorship, and publication of this article.
References
Aamo, O. M., & Fossen, T. I. (1999). Controlling line tension in thruster assisted mooring systems. In Proceedings of the 1999 IEEE International Conference on Control Applications (Vol. 2, pp. 1104–1109). IEEE. https://doi.org/10.1109/CCA.1999.801126
Bedekar, K., Oterkus, E., & Oterkus, S. (2025). Ammonia bunkering—Infrastructure, finance, insurance and regulatory issues: A review. Sustainable Marine Structures, 7(4), 104–131. https://doi.org/10.36956/sms.v7i4.2713
Bouncken, R. B., Czakon, W., & Schmitt, F. (2026). Purposeful sampling and saturation in qualitative research methodologies: Recommendations and review. Review of Managerial Science, 20(2), 579–615. https://doi.org/10.1007/s11846-025-00881-2
Cheng, H., Li, L., Ong, M. C., Aarsæther, K. G., & Sim, J. (2021). Effects of mooring line breakage on dynamic responses of grid moored fish farms under pure current conditions. Ocean Engineering, 237, 109638. https://doi.org/10.1016/j.oceaneng.2021.109638
Collette, M., Zhan, Z., Zhu, L., Zanic, V., Okada, T., Arima, T., Skjong, R., Jeong, H. K., & Egorov, G. (2018). Committee IV.1: Design principles and criteria. In M. L. Kaminski & P. Rigo (Eds.), Proceedings of the 20th International Ship and Offshore Structures Congress (ISSC 2018) (Vol. 1, pp. 549–607). IOS Press. https://doi.org/10.3233/978-1-61499-862-4-549
Djatmiko, E. B., Rebecca, J., & Murdjito, M. (2017). The study of tandem offloading performance and operability on the cylindrical hull FPSO Sevan Stabilized Platform with variation in mooring system configuration. International Journal of Offshore and Coastal Engineering, 1(2), 70–76. https://doi.org/10.12962/j2580-0914.v1i2.7054
Feng, X., Hu, S., Gu, W., Jin, X., & Lu, Y. (2020). A simulation-based approach for assessing seaside infrastructure improvement measures for large marine crude oil terminals. Transportation Research Part E: Logistics and Transportation Review, 142, 102051. https://doi.org/10.1016/j.tre.2020.102051
Formela, K., Gil, M., & Wilczyński, P. (2016). Determination of the tankers’ drift during STS operation—Simulation study. TransNav: International Journal on Marine Navigation and Safety of Sea Transportation, 10(4), 619–623. https://doi.org/10.12716/1001.10.04.11
Forsell, K., Eriksson, H., Järvholm, B., Lundh, M., Andersson, E., & Nilsson, R. (2017). Work environment and safety climate in the Swedish merchant fleet. International Archives of Occupational and Environmental Health, 90(2), 161–168. https://doi.org/10.1007/s00420-016-1180-0
Gao, F., Wang, L., Yeter, B., & Kolios, A. (2025). Comparative analysis of design standards for floating offshore wind turbine mooring systems: A focus on line tension safety factors. Journal of Marine Science and Engineering, 13(11), 2170. https://doi.org/10.3390/jmse13112170
Hageman, R., Aalberts, P., Leeuwenburgh, R., & Grasso, N. (2019). Integrity management of mooring systems. In Offshore Technology Conference. Offshore Technology Conference. https://doi.org/10.4043/29560-MS
Hennø, E., & Schøyen, H. (2024). A lean approach to comparing the mooring systems of Suezmax tankers. Journal of Marine Science and Technology, 29(4), 956–974. https://doi.org/10.1007/s00773-024-01030-2
Jaiswal, V., & Ruskin, A. (2019). Mooring line failure detection using machine learning. In Offshore Technology Conference. Offshore Technology Conference. https://doi.org/10.4043/29511-MS
Jiang, S., Liu, L., Peng, P., Xu, M., & Yan, R. (2026). Prediction of vessel arrival time to port: A review of current studies. Maritime Policy & Management, 53(2), 301–326. https://doi.org/10.1080/03088839.2025.2488376
Kamis, A. S., Ahmad Fuad, A. F., Ashaari, A., & Yang, W. W. (2026). Directional sensitivity of wind current alignment in wheel over point geometry: Development and validation of ATMM-W through percentage change. Journal of Marine Engineering & Technology, 25(5), 771–780. https://doi.org/10.1080/20464177.2026.2678623
Kuang, J., Li, Y., Zhang, Z., Yuan, Z., Gong, Y., & Liu, Z. (2024). Investigation on the hydrodynamic response and stability performance of a cable-laying vessel under various mooring conditions. In 2024 International Conference on Energy and Electrical Engineering (EEE) (pp. 1–5). IEEE. https://doi.org/10.1109/EEE59956.2024.10709686
Lee, S.-W., Lee, H.-T., Kim, D.-G., & Cho, I.-S. (2019). Identification of impact factors in ship-to-ship mooring through sensitivity analysis. Journal of Navigation and Port Research, 43(5), 310–319. https://doi.org/10.5394/KINPR.2019.43.5.310
Liang, G., Jiang, Z., & Merz, K. (2023). Dynamic analysis of a dual-spar floating offshore wind farm with shared moorings in extreme environmental conditions. Marine Structures, 90, 103441. https://doi.org/10.1016/j.marstruc.2023.103441
Lin, Z., & Liu, X. (2020). Assessment of wind turbine aero-hydro-servo-elastic modelling on the effects of mooring line tension via deep learning. Energies, 13(9), 2264. https://doi.org/10.3390/en13092264
Liu, N., Qu, P., Chen, S., Chen, H., & Wang, S. (2025). Shore-based constant tension mooring system performance and configuration study based on cross-domain collaborative analysis method. Journal of Marine Science and Engineering, 13(8), 1385. https://doi.org/10.3390/jmse13081385
Murdjito, Shidqi, H. M. N., Wardhana, W., Djatmiko, E. B., Prasetyawan, I., & Rachmadiarto, F. (2023). Selection of mooring system configuration of a FSO using multi-criteria methods. IOP Conference Series: Earth and Environmental Science, 1166(1), Article 012030. https://doi.org/10.1088/1755-1315/1166/1/012030
Oduro, P., Uzougbo, N. S., & Ugwu, M. C. (2024). Navigating legal pathways: Optimizing energy sustainability through compliance, renewable integration, and maritime efficiency. Engineering Science & Technology Journal, 5(5), 1732–1751. https://doi.org/10.51594/estj.v5i5.1152
Oil Companies International Marine Forum. (2018). Mooring equipment guidelines (MEG4) (4th ed.).
Oil Companies International Marine Forum, Chemical Distribution Institute, International Chamber of Shipping, & Society of International Gas Tanker and Terminal Operators. (2013). Ship to ship transfer guide for petroleum, chemicals and liquefied gases (2nd ed.). Oil Companies International Marine Forum.
Rajendran, A. I., Zhang, C., Santo, H., & Michael, S. (2026). Machine learning surrogates for predicting line tensions in catenary and semi-taut mooring systems. In Offshore Technology Conference Asia. Offshore Technology Conference. https://doi.org/10.4043/36517-MS
Riviera Newsletters. (2015, December 4). Lessons learned from an STS near-miss. Riviera Maritime Media. https://www.rivieramm.com/opinion/lessons-learned-from-an-sts-near-miss-34860
Salah, H., Ali, W., & Gamal, E. (2026). Modified static mooring analysis of oil and gas marine jetties compared with dynamic mooring analysis. Engineering and Applied Sciences, 11(1), 20–32. https://doi.org/10.11648/j.eas.20261101.14
Singh, S., Dwivedi, A., & Pratap, S. (2023). Sustainable maritime freight transportation: Current status and future directions. Sustainability, 15(8), 6996. https://doi.org/10.3390/su15086996
Stavrou, D. I., & Ventikos, N. P. (2014). Ship to ship transfer of cargo operations: Risk assessment applying a fuzzy inference system. Journal of Risk Analysis and Crisis Response, 4(4), 214–227. https://doi.org/10.2991/jrarc.2014.4.4.3
Subbulakshmi, A., & Verma, M. (2024). Dynamic response analysis of a semisubmersible floating offshore wind turbine subjected to mooring line failure under normal and extreme environmental conditions. Ocean Engineering, 304, 117907. https://doi.org/10.1016/j.oceaneng.2024.117907
Tang, C., Zhu, H., Liu, C., & Liu, J. (2025). Impact of line pre-tension on the mooring safety of large vessel. In 2025 8th International Conference on Transportation Information and Safety (ICTIS) (pp. 845–853). IEEE. https://doi.org/10.1109/ICTIS68762.2025.11214861
Tuswan, T., Adam, A., Alfatarizqi, A., Zakki, A. F., Adietya, B. A., Ariany, Z., & Windyandari, A. (2025). Effect of excessive towing load on the motion and tension behaviour of 50,000 DWT single point mooring system. Pomorstvo, 39(2), 306–323. https://doi.org/10.31217/p.39.2.9
Ventikos, N. P., & Stavrou, D. I. (2013). Ship to ship (STS) transfer of cargo: Latest developments and operational risk assessment. SPOUDAI Journal of Economics and Business, 63(3–4), 172–180.
Wan, C., Yang, Z., Zhang, D., Yan, X., & Fan, S. (2018). Resilience in transportation systems: A systematic review and future directions. Transport Reviews, 38(4), 479–498. https://doi.org/10.1080/01441647.2017.1383532
Wu, X., & Moan, T. (2017). Dynamic behaviour of anchor handling vessels during anchor deployment. Journal of Marine Science and Technology, 22(4), 655–672. https://doi.org/10.1007/s00773-017-0440-3
Xu, X., Gaidai, O., Karpa, O., Wang, J., Ye, R., & Cheng, Y. (2021). Wind farm support vessel extreme roll assessment while docking in the Bohai Sea. China Ocean Engineering, 35(2), 308–316. https://doi.org/10.1007/s13344-021-0028-x
Yan, M., Zheng, Z., Sun, Z., Ma, X., & Dong, G. (2023). Numerical evaluation of the tension mooring effects on the hydrodynamic response of moored ships under harbor oscillations. Ocean Engineering, 288, 116127. https://doi.org/10.1016/j.oceaneng.2023.116127
Yang, H., Zhang, L., Stansby, P., & Draycott, S. (2026). Data-driven condition monitoring of mooring systems: A demonstration with the M4 multi-float wave energy converter. Ocean Engineering, 351, 124312. https://doi.org/10.1016/j.oceaneng.2026.124312
Zhang, X., He, L., Ma, G., & Ma, Q. (2023). Mechanism of mooring line breakage and shutdown opportunity analysis of a semi-submersible offshore wind turbine in extreme operating gust. Ocean Engineering, 268, 113399. https://doi.org/10.1016/j.oceaneng.2022.113399
Zhang, Z., Wang, X., Zhang, X., Zhou, C., & Wang, X. (2024). Dynamic responses and mooring line failure analysis of the fully submersible platform for floating wind turbine under typhoon. Engineering Structures, 301, 117334. https://doi.org/10.1016/j.engstruct.2023.117334
